The only steamer here that scores a perfect ten on two metrics, and the lowest score on this site for weight. Both facts come from the same soleplate.
By Scooter M., enthusiast, crease control · Published
The Rowenta Pure Force DR8822 publishes 1,875 W, a 210 ml tank, a 10-second heat-up and 3 pounds. Two of those are the best figures on this site: 1,875 W is the ceiling a US circuit allows, and ten seconds is three times faster than the next-quickest full-power handheld. The third is the worst: at three pounds it scores 0.8 out of 10 for portability, the lowest of any handheld here. It is a 2-in-1, so it presses horizontally as well as steaming vertically, and the plate is exactly where the weight comes from.
We earn a commission if you buy through the links on this page, at no extra cost to you. It does not change which steamer we rank first — the ranking comes from published specifications and the arithmetic on our method page. We have not tested these units. Full disclosure.
Ten seconds, and why it is not a rounding of thirty
Published heat-up times across this site cluster at 30 and 40 seconds. Two units break the pattern in either direction: the HiLIFE HL7 at 120 seconds, and this one at 10. It is the only product in the registry that takes a perfect score on the heat-up metric, because 10 seconds is the bottom of the range the scoring rubric uses for handhelds.
Whether that matters depends entirely on how you steam. If you steam a planned session — a rail of shirts on a Sunday — the difference between 10 seconds and 40 is nothing. If the thing that stops you steaming is that you are already late and the machine is cold, thirty seconds is the whole obstacle, and this is the one unit that removes it.
Each figure is the value in that listing's own structured Heat Time field. Where a listing's title disagrees with its filed field, this site publishes the filed one.
The plate is the point, and the weight is the plate
A vertical steamer relaxes a wrinkle by getting moisture and heat into the fiber. It cannot make a crease, because a crease is a fold set under pressure. That is the whole steamer versus iron question in a sentence, and the Pure Force is one of the few machines here that answers both sides of it: steam it hanging, then lay the collar or the trouser leg flat and press.
The price of that is three pounds, which is iron weight rather than steamer weight. On the class range this site scores against — 0.7 to 3.2 pounds for a handheld — three pounds is almost at the floor, and it produces a portability score of 0.8 out of 10, the lowest of any handheld in the registry. The nearest comparison is the CHI Deluxe at 2.9 pounds, which draws 875 fewer watts for its weight.
The tank, and the seven minutes it buys
210 ml is larger than the Rowenta XCEL's 189 and smaller than the Conair's 216, so it sits in the middle of the 1,875 W group. At the full 1,875 W a tank converts at roughly 30 ml a minute, which makes 210 ml about seven minutes of continuous steam.
Seven minutes is the standing cost of buying the power ceiling, and it is the reason this site keeps pointing people at uprights. It is enough for two or three garments. It is not enough for a wardrobe, and no 1,875 W handheld on the market solves that, because the tank you would need makes the machine too heavy to hold.
What Rowenta does not publish
No warranty term appears on this listing. That is notable for an established brand — the XCEL publishes one year and the Conair publishes two — and it is the clearest weakness in an otherwise complete specification sheet. Everything else is filed: power, tank, heat-up, weight and voltage.
Honest cons
Three pounds. The heaviest handheld on this site, and the weight is permanent — it is the soleplate.
Seven minutes per fill. The standing cost of 1,875 W with a handheld-sized tank.
No published warranty, on a listing from a brand that publishes one on its other models.
A plate needs a surface. If you have no board and no table, half of what you are paying for is dead weight.
Who should buy it
Buy the Pure Force if you want one machine instead of two: full power, the fastest start on the site, and a plate for the collars and creases steam cannot do. It is the best single answer here for someone who owns shirts and a table and does not want an ironing setup. Buy the Rowenta XCEL instead if you steam hanging garments only — same power, less than half the weight, and a published warranty. Buy a 2-in-1 from the budget end instead if the press plate is what you want and the power ceiling is not — the 2-in-1 roundup ranks them. Buy a standing steamer instead if seven minutes per fill is the part that bothers you; the uprights start at 1.8 liters.
The unit reviewed
Ranked on published specifications. Tap a row for the full write-up; the price button goes to Amazon.
#
Product
Best for
Spec score
Price
1
Rowenta Pure Force 2-in-1 DR8822Steams vertically, presses horizontally, and publishes the fastest heat-up in this set by a factor of three.
Ten seconds to steam is the lowest published heat-up of anything on this page. If the thing that stops you steaming is the wait, this is the answer to it.
The horizontal plate is the real argument. A steamer relaxes a wrinkle; only contact and pressure will put a crease into a trouser leg or flatten a collar point. This does both, which is why for most wardrobes it genuinely replaces an iron and a board.
Three pounds is heavy for a handheld, and that weight is the soleplate. Judge it as a small iron that also steams, not as a light steamer that also presses.
Good
10-second published heat-up, the fastest on this site
Vertical steam and a horizontal press plate in one body
210 ml tank, larger than most 1,875W handhelds
Not good
Three pounds — the heaviest handheld here
A plate needs a surface, so it is not purely hang-and-go
Wider footprint than a pure steamer to store
Who should not buy it. Skip this if you only ever steam hanging garments. You would be carrying the weight of a soleplate you never put down.
Questions people actually ask
+How fast does the Rowenta Pure Force heat up?
Ten seconds, as published in the listing's own structured Heat Time field. That is the fastest figure on this site by a factor of three against the other 1,875 W handhelds, and it is the only product here that scores a perfect ten on the heat-up metric.
+Is the Rowenta Pure Force too heavy?
At three pounds it is the heaviest handheld on this site and scores 0.8 out of 10 for portability. Whether that disqualifies it depends on use: on a board between passes it is fine, held up to a hanging coat for a long session it is not.
+Rowenta Pure Force or Rowenta XCEL?
Both publish 1,875 W. The Pure Force adds a horizontal press plate and a 10-second heat-up and weighs three pounds; the XCEL is a pure vertical steamer at 1.4 pounds with a published one-year warranty and a smaller tank. Buy the Pure Force if you want to press as well as steam.
+Does the Rowenta Pure Force come with a warranty?
No warranty term is published on its Amazon listing. Rowenta publishes one on other models, which makes the omission here worth noticing before you buy.
